Compute Module • Re: Need help on CM4S with CAM1,CAM0 setup in config.txt
Just a thought...Can it actually cope with 2 different cameras or do they need to be the same ? YES. Refer to official document herehttps://www.raspberrypi.com/documentati ... era-moduleCode:...
View ArticleGeneral discussion • How to Measure GPU Usage on Raspberry Pi 5? (Newbie)
Hi everyone,I'm wondering if there's a way to measure GPU usage (e.g., in percentage) from the command line. Are there any tools, commands, or scripts that can help with this?Any advice would be...
View ArticleRaspberry Pi OS • Re: Working ~/.config/labwc/menu.xml
Here is one :https://github.com/labwc/labwc/blob/mas ... s/menu.xmlAnd the manual :https://labwc.github.io/labwc-menu.5.htmlStatistics: Posted by manu2007 — Fri Jun 20, 2025 8:34 am
View ArticleClik here to view.
General discussion • 3D case for Pi5 Pimoroni bottom design idea/help
Hello,I would like a 3D printed case for my Raspberry Pi5 desktop OS with a Pimoroni bottom.The naked PCB and metal connectors are too fragile to be dumped in the backpack daily, so perhaps some 3D...
View ArticleCompute Module • Re: Raspberry Pi as a Bridge
I have the following questions: Which CM module and IO board will be the best for my application?I saw people using LAN7500 chip (a USB 2.0-to-Ethernet bridge) and LAN7800 (a USB3.0-to- Ethernet...
View ArticleGeneral discussion • Re: How to Measure GPU Usage on Raspberry Pi 5? (Newbie)
https://www.raspberrypi.com/documentati ... l#vcgencmdStatistics: Posted by kerry_s — Fri Jun 20, 2025 9:04 am
View ArticleAdvanced users • Re: Newbie questions regarding Chrony
Don't suppose you had time to look at my config in my last post? Does it look ok?Is there something you're concerned about?I looked at it briefly. Looks like you added some additional subnets that...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Re: DSI display content wraps
Please push a complete branch that I can just run.Created two PR with the changes:6.6: https://github.com/raspberrypi/linux/pull/69136.12: https://github.com/raspberrypi/linux/pull/6914The problem...
View ArticleTroubleshooting • Re: Raspberry Pi Zero 2 W with a strange connectivity issue.
So far no luck getting the Raspberry Pi to work properly with WiFi, without some bizarre glitches.After upgrading Raspberry Pi OS today per "apt update && apt upgrade" SUDDENLY WiFi just...
View ArticleGeneral • Re: openocd does not restartpico_w properly
"adapter speed 5000; program \"${command:raspberry-pi-pico.launchTargetPath}\" verify; reset halt ; rp2040.core1 arp_reset assert 0 ; rp2040.core0 arp_reset assert 0 ; exit"Statistics: Posted by gmx —...
View ArticleGeneral discussion • Re: Rpi4b overclock settings
Thanks, but I think I managed a bit ? Got:CPU to 2350GPU to 900If you keep incrementing the speed by a small amount, it usually wont crash on boot. Instead it will probably freeze at some time later....
View ArticleGraphics, sound and multimedia • Re: 40 buttons with RGB LEDs and more
For the buttons, consider a matrix arrangement (even if the layout is not rectangular). That should save some GPIOs.I'm guessing the LEDs are built into the buttons and you can't use serial...
View ArticleCompute Module • Re: CM4 and correct selection of packages for current...
don't know that product but wouldn't be too surprised If they use an HDMi-to-DPI Bridge for the LCD. Seeing hdmi_drive=2 reminds me on TFP401.where do you get that EDID from? is the actually an EEPROM...
View ArticleBeta testing • Re: wayland, wayland-protocols, libliftoff
Stick it on GitHub as a future problem, given Trixie has not been released for beta testing, but it will become a problem in the latter end of the year (at guess).Back to to Wayland and things. (My...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Hardware PWM does not work on Pi 5 with...
I noticed that the hardware PWM does not work on Pi 5 with kernel 6.12.X.By adding "dtoverlay=pwm-2chan" in /boot/firmware/config.txt, "/sys/class/pwm/pwmchip2" should appear on Pi 5.However, it does...
View ArticleTroubleshooting • Re: Mouse/Keyboard input broken on raspberry pi 5
It's a wired keyboard and mouse that I plugged in without any dongle or adapter and only in the usb 3.0 and usb 2.0 ports. The keyboard and mouse worked on a normal windows computer.Statistics: Posted...
View ArticleMedia centres • Re: Peppy player
On the older version, the Kandinsky image is correct without smearing. Only the touch was a problem, but I commented out the line #lcd_rotate=2 and everything works correctly. There is smearing on the...
View ArticlePython • Re: gpiozero, RPI GPIO, and pigpio - Python
Raspberry Pi 4B,Statistics: Posted by Log_Fash19 — Sat Jun 21, 2025 7:53 am
View ArticleClik here to view.
Graphics, sound and multimedia • Re: Midi, I2C, Pi 5 RP1 chip, which gpio lib???
Still I'm not sure if Os overlays take over and fluctuates the clock, need to learn this part way better to deal with it...Yes overlays can fix the clock, so playing with clock dividers directly won't...
View ArticleTroubleshooting • Re: Raspberry Pi 3a/Bookworm + Lo-tech VGA HAT woes
So RE: Issue 1I'm running Raspberry Pi OS (Bookworm) 32-bit Lite.With these commented out it works:#dtoverlay=vc4-kms-v3d#max_framebuffers=2As it falls back to fbdev "legacy" mode and works fine even...
View Article