Troubleshooting • Re: Micro HDMI connection sensitive [solved]
Adding a note: I bumped the microHDMI cable and the screen resolution reappeared at 1024x768.Normal resolution is 1920x0180.I then intentionally bumped the microHDMI and the screen changed to black,...
View ArticleBeginners • Re: imager_1.9.4 Changed size of my 128 GB to 508 MB..
After imaging there will be two partitions on the card, a smaller FAT one for all the boot files, and a larger EXT4 filling the rest of the SD card with the rootfs. When looked at on a Windows machine...
View ArticleTroubleshooting • Re: Strange behavior with Raspberry Pis at low temperature
I agree that the blue screening PC is unrelated - you should not be able to blue screen a PC simply using SSH - it's just a net connection.100k (assuming kelvin?) is -173C, so that is pretty cold,...
View ArticleTroubleshooting • hailo8 +hat
After updating my rpi 5 today. I can't run any mp4 file on the hailo-rpi5-examples.Something changed in the GStreamer chain?It just not start any longer.But the camera input works fine.Statistics:...
View ArticleBeginners • WiFi Disabled when using Raspberry Pi Imager
I'm using the Raspberry Pi Imager program on a PC to build SD cards for a range of Pi devices, Zero W, 4 and 5. I set the WiFi credentials in the settings, but when the image boots the WiFi is turned...
View ArticleBeginners • Re: WiFi Disabled when using Raspberry Pi Imager
I'm using the Raspberry Pi Imager program on a PC to build SD cards for a range of Pi devices, Zero W, 4 and 5. I set the WiFi credentials in the settings, but when the image boots the WiFi is turned...
View ArticleGeneral discussion • How to Play a Fullscreen Splash Video on Raspberry Pi OS...
I'm using Raspberry Pi OS Lite (32-bit). At boot, I want to play a full-screen video (e.g. splash.mp4) without showing any terminal output, boot logs, or blinking cursor. I don't want to use Plymouth...
View ArticleTroubleshooting • Re: Pi 4 SSD Boot Fails on USB 3 Port, Works on USB 2 port
I created a EEPROM updater card with imager and successfully updated. That stopped the pi4 from even attempting to boot from the SSD when the hub is plugged into the USB 3 ports. Now the SSD just...
View ArticleTroubleshooting • Re: Replacement DA9091 PMIC
If I had the capital, I'd probably try to buy a reel, as long as I am then allowed to sell the small batches on ebay or through here (not for profit).I wondered about doing that myself. But for a...
View ArticleTroubleshooting • Re: please help, is my raspberry pi 3 B+ dead?
thanks for your reply,I mean my charger has two USB A ports one is 1A the other is 2.4A. I tried both ports.I tried a different HDMI cable and a different monitor — same result.My main question is:How...
View ArticleTroubleshooting • Re: Project Terminated
I since have purchased a Radxa Rock5B and am waiting on it to come so I can start trying to port everything over. Good luck!Statistics: Posted by jamesh — Thu Jun 19, 2025 8:41 am
View ArticlePython • Re: MJPEG live streaming failed
Interesting.What was the answer to how come the file is in /home/test.py and not /home/pi/test.py ?Statistics: Posted by neilgl — Thu Jun 19, 2025 8:44 am
View ArticlePython • Re: Accurate Hardware-Timed Square Wave Generation on Pi 5...
The PIO on the RP1 chip on the Pi 5 is now accessible - that might be an option (See the PIO docs on thje RP2350 for details). Limited documentation on how to use it at the moment though.Statistics:...
View ArticleTroubleshooting • Re: Raspberry Pi Imager v1.9.4 Not Creating...
Maybe use 1.8.5 to flash the “Legacy 64-bit” version (Bullseye) and boot from that.Statistics: Posted by neilgl — Thu Jun 19, 2025 8:48 am
View ArticleHATs and other add-ons • Re: Requesting RPI-POE-MOD board schematics.
Hello. I recently acquired a bunch of Raspberry Pi POE HATs from a friend. The issue is that they are the first revision that has problems with the power draw from USB devices (see...
View ArticleAdvanced users • ptp4l broken again in 6.12.25
Hello allSo i've been trying to figure out why 2 of my rpis are different on ptp4l sync. The one with 6.6.74 kernel seems fine, the one with the 6.12.25 kernel doesn't work, here's some output:Code:...
View ArticleBeginners • Re: Best model for serial tty and ssh session?
Im not sure does the built in UART have hardware flow control? If not I suspect I'll have to use the GPIO pins...the PL011 uart has hardware flow control supporthttps://pinout.xyz/pinout/uartomly...
View ArticleAdvanced users • Re: What's taking 9 seconds before Linux begins to boot (CM5...
What people seem to care more about than boot times is reliability. Apart from all of the effort that would be required to fully understand the memory controller setup, as soon as we modify the...
View ArticlePython • Re: Libraries not installing properly
Yes, which makes this all so infuriating.The "adafruit_ads1x15" comes with a version of Blinka when installed as well, but that also doesn't work.Statistics: Posted by MTR20XX — Thu Jun 19, 2025 9:24 am
View ArticleAdvanced users • Re: Moving Linux Kernel to 6.12
If anyone is still monitoring this post, it seems 6.12.25 breaks ptp4l again.I posted here: viewtopic.php?p=2321622#p2321622Any advice is much appreciated.Statistics: Posted by catubc — Thu Jun 19,...
View Article