General discussion • Wayland issue
The Pi 5 (8Gb) with 64 bit PiOS is excellent. However I've switched away from Wayland to X11.The reason is that in X11 the images are smooth when I play commercial films that I've ripped from my DVD...
View ArticleBeginners • Re: Information transfer from Raspberry Pi 4 to Raspberry Pi 5
Hello,I am wondering how to transfer information from Sd card that Raspberry Pi 4 uses to Sd card that Raspberry Pi 5 uses. I tried copying information to the second card directly, but Raspberry Pi 5...
View ArticleTroubleshooting • Re: Strange with raspi-gpio get
Thank you, readme said:Name: uart5Info: Enable uart 5 on GPIOs 12-15. BCM2711 only.Load: dtoverlay=uart5,<param>Params: ctsrts Enable CTS/RTS on GPIOs 14-15 (default off)raspi-gpio funcs 0-20...
View ArticleGeneral • Re: Multi-channel, multi-sample DMA ADC reads
Concurrency takes time to master. It is not something you need to learn right away.Statistics: Posted by dthacher — Mon Feb 12, 2024 4:09 pm
View ArticleGeneral • Re: RP2040 pull-down resistance below data sheet ranges
But it does say their resistance is between 50K and 80K without any further qualification, therefore that should apply in any normal use. So whether they are resistors or not, their calculated current...
View ArticleClik here to view.
For sale • Re: Pi 400 - power socket faulty
Statistics: Posted by Fixizin — Mon Feb 12, 2024 4:22 pm
View ArticleTroubleshooting • Re: Only have BT mouse and Keyboard, how to connect to Pi4?
OK. You say you have two Android smart phones at least one of which has an ssh client.Try the following:Beg, borrow, or steal a USB A to whatever charge and sync cableBoot the Pi.Connect Pi and...
View ArticleNetworking and servers • Re: Bonding connection with Raspberry Pi 4
Good morning,I need to temporarily use my Raspberry Pi 4 (8GB RAM) while traveling to bond two connections, one with a 4G Modem and one with USB tethering of my Android smartphone, do you know how I...
View ArticleTroubleshooting • Re: SSH over Ethernet directly to PC causes: client_loop:...
If the connection between the Pi and the PC is made by a single ethernet cable between the Pi and PC, then you will have to statically assign IP addresses to the ethernet connections in the Pi and the...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Re: Can I reconfigure CAMIO0 to be an input
My information says on a PI02 the CAM_GPIO0 (pin 17) is GPIO 40, but CAM_GPIO1 (pin 18) is not physically connected.Your use of GPIOs 32 and 41 would match a Pi0, with Pi0W being 30 and 44.Statistics:...
View ArticleRaspberry Pi OS • Re: Raspberry Pi 5 - Raspi OS keep crashing while using...
Probably depends on which sites you are looking at.Six tabs open in Firefox 122 on Bookworm 64-bit on a PI 5 8GB - all OK.Statistics: Posted by neilgl — Tue Feb 13, 2024 4:03 pm
View ArticleAdvanced users • Re: rp1 dpi capable of interlaced video output ?
..Anyway the new rp1 is overall a big regressionWell, if you think so! Stay away from Pi5 then.Statistics: Posted by aBUGSworstnightmare — Tue Feb 13, 2024 4:12 pm
View ArticleGraphics, sound and multimedia • Re: LM320DN1A display with Raspi
Hello, would it be possible to connect the LM320DN1A display to a Raspberry Pi 3B+?Best regardsSorry, but I will not look for a data sheet related to your random display.Either post it or figure out...
View ArticleBeginners • Re: Unable to Control Brightness on Raspberry Pi 4B Running...
xrandr tries to use the gamma table for brightness control, and that is not implemented on Pi4.Statistics: Posted by 6by9 — Tue Feb 13, 2024 4:25 pm
View ArticleClik here to view.
Beginners • Trying to get AppImage to work on RPi 5, bookworm
Specifically, I am trying to get the newest Arduino IDE on my three day old Raspberry Pi 5 with 64 bit Bookworm, but I do not seem to be able to get any appimage whatsoever to work on my Pi...
View ArticleRaspberry Pi OS • Re: cmdline.txt doesn't effect
Hello jojopisorry for the lack of explanation,Here is what I want to do:I want to use my raspberry to use it as a dynamic marquee.I followed this tutorial: https://forum.batocera.org/d/7269-dynam ......
View ArticleTroubleshooting • Re: [Solved] USB port errors when coping data
ThanksStatistics: Posted by neilgl — Tue Feb 20, 2024 4:47 pm
View ArticleHATs and other add-ons • Re: Pimoroni NVMe Base with Lexar NM790 SSD
Page 97 of MagPi #138, the "Next Month ..." advert.That refers to the new HAT+ standard that guarantees HAT+ compliant HATs are compatibile with the deeper sleep mode where the 3V3 rail is disabled....
View ArticleBeginners • Re: Not yet a beginner
Hi I am on the verge of buying piI have old printers ,some of which do not have networking ability so my plan was to use a pi as a print serverA network accessible card as a small file server built in...
View ArticleRaspberry Pi OS • Re: searching for an updated version of a package (not main)
I prefer not to add sid to my sources.lists, but manually pull the required debs from whichever repository when needed. I wasn't aware that kicad 7.1.10 was ready, so I just downloaded the deb files...
View Article