Thanks got it working
wired as ...
copied your dtbo and dts files to /boot/overlays and /boot/firmware/overlays (JIC)
copied the .bin to /lib/firmware
modified /boot/firmware/config.txt withThe only issue so far I can't get python tkinter screens to work on it, seem to lock up
wired as ...
Code:
Pin GPIO------------------SD0/MIS0 21 (9) *LED 16 (23)SCK 23 (11)SD1(MOS1) 19 (10)D/C 22 (25)RESET 18 (24)CS 24 (18)GND 6 gndVCC 1 3.3v* Not sure if requiredcopied the .bin to /lib/firmware
modified /boot/firmware/config.txt with
Code:
# 320x240pixels Waveshare SKU18366 2.8in displaydtoverlay=mipi-dbi-spi,speed=48000000dtparam=compatible=wavesku18366\0panel-mipi-dbi-spidtparam=write-only,cpha,cpoldtparam=width=320,height=240,width-mm=68,height-mm=52dtparam=reset-gpio=24,dc-gpio=25,backlight-gpio=23Statistics: Posted by gordon77 — Fri May 03, 2024 8:46 am