I have the same display, and followed the wiring in this guide:
https://www.buydisplay.com/Raspberry_Pi ... rry_Pi.pdf
The dots on the grid on the back of the PCB indicate which links should be made or open for the interface mode that you want. You should choose 4-wire SPI. If you're lucky then that's what the factory settings are.
https://www.buydisplay.com/Raspberry_Pi ... rry_Pi.pdf
The dots on the grid on the back of the PCB indicate which links should be made or open for the interface mode that you want. You should choose 4-wire SPI. If you're lucky then that's what the factory settings are.
Statistics: Posted by ame — Sat Jan 03, 2026 9:52 pm