Just to check, what does
vcgencmd get_config usb_max_current_enable
say (at a terminal).
Maybe other can help so check a few things
vcgencmd pmic_read_adc
root@darkstar:~# vcgencmd get_config usb_max_current_enable
usb_max_current_enable=1
root@darkstar:~# vcgencmd pmic_read_adc
3V7_WL_SW_A current(0)=0.04879650A
3V3_SYS_A current(1)=0.11320790A
1V8_SYS_A current(2)=0.19811380A
DDR_VDD2_A current(3)=0.01561488A
DDR_VDDQ_A current(4)=0.00000000A
1V1_SYS_A current(5)=0.19908970A
0V8_SW_A current(6)=0.26252520A
VDD_CORE_A current(7)=0.75012000A
3V3_DAC_A current(17)=0.00000000A
3V3_ADC_A current(18)=0.00024420A
0V8_AON_A current(16)=0.00305250A
HDMI_A current(22)=0.01086690A
3V7_WL_SW_V volt(8)=3.71184000V
3V3_SYS_V volt(9)=3.29333000V
1V8_SYS_V volt(10)=1.81489400V
DDR_VDD2_V volt(11)=1.10879000V
DDR_VDDQ_V volt(12)=0.60366240V
1V1_SYS_V volt(13)=1.10183000V
0V8_SW_V volt(14)=0.79670250V
VDD_CORE_V volt(15)=0.86038990V
3V3_DAC_V volt(20)=3.30402600V
3V3_ADC_V volt(21)=3.30402600V
0V8_AON_V volt(19)=0.79941320V
HDMI_V volt(23)=5.06922000V
EXT5V_V volt(24)=5.09602000V
BATT_V volt(25)=2.47179200V
Statistics: Posted by southernlegends — Fri Dec 19, 2025 10:30 pm