Presumably you got that from https://www.panoxdisplay.com/tft-lcd/2- ... 40-vr.html
It has no detail over the initialisation commands required, nor of the video timing requirements.
The web page does list
I also note it has a section
It has no detail over the initialisation commands required, nor of the video timing requirements.
The web page does list
It's probably the "IC Datasheet" you need, but those are often generic driver chips that can be used on a number of displays. The datasheet you have found says it is a R63423, but I can't find any information on that driver IC. More detail may be in a complete "Display Datasheet".How can I drive the display panel?
Panox Display will provide necessary specifications for most LCD/OLED on sale, including,
Display Datasheet
Display Drawing
IC Datasheet
Circuit schematic
For most electronics engineers, our specifications are enough to run the display, and we will provide some assistance.
But Panox Display is not a school, if customers don`t know the basic knowledge to design circuit boards, we suggest using our controller board to drive the display.
I also note it has a section
Can I connect this display to Raspberry Pi?
If your Raspberry Pi can support the interface of the display panel, and you know how to program on Raspberry Pi, you can connect to our display.
If you don`t know or don`t want to write a display program on Raspberry Pi, it`s better to get an HDMI controller board from us, and Panox Display will send a config.txt file for reference.
Statistics: Posted by 6by9 — Fri Dec 12, 2025 9:36 pm