Tested onIn about 30 minutes after this post, you should be able to do sudo rpi-update pulls/6013 and your DT overlay should now result in a clock on gpio4.
Code:
Linux raspberrypi 6.6.21-v8-16k+ #1741 SMP PREEMPT Fri Mar 8 13:44:12 GMT 2024 aarch64 GNU/LinuxCode:
cat /sys/kernel/debug/clk/clk_summary enable prepare protect duty hardware clock count count count rate accuracy phase cycle enable------------------------------------------------------------------------------------------------------- pll_sys_core 3 3 0 1000000000 0 0 50000 Y pll_sys_sec 1 1 0 125000000 0 0 50000 Y clk_eth 0 0 0 125000000 0 0 50000 Y pll_sys 3 3 0 200000000 0 0 50000 Y clk_gp0 1 1 0 24576015 0 0 50000 YStatistics: Posted by BohdanBuinich — Sun Mar 10, 2024 8:27 pm