This has the basics https://projects.raspberrypi.org/en/pro ... apse-setup (but we use picamera2 now)
In that for loop you will need to set a GPIO high to turn on the IR LEDS - e,g, via a suitable relay.
Then take the picture, then turn off the IR LEDs via GPIO.
In that for loop you will need to set a GPIO high to turn on the IR LEDS - e,g, via a suitable relay.
Then take the picture, then turn off the IR LEDs via GPIO.
Statistics: Posted by neilgl — Tue May 20, 2025 8:25 pm