I have taken a perfectly good peppy player running the Marc edition and turned it into a brick by upgrading to Klee. the hardware is a pi3B+ with a 7" RP touchscreen using the headphone output to my stereo. First I tried to upgrade in place without removing the SD card. Nothing was displayed on the screen so then I tried removing the SD and writing the image to it, nothing is displayed except a one second white flash during boot. Ssh works and I have tried modifying the config.txt. Nothing changed. The web UI will not connect with error "Safari cant open the page because the address isn't valid". I got the same result with Chrome. I tried formatting and overwriting the SD card a couple of times with the same result. I enabled logging and appending in the config.txt file but nothing is being added to it.
I ran the suggested git commands for the Klee issues but nothing changed.
I'm stumped.
Hardware Pi3B+ with 5.25VDC 2.5A supply
Raspberry Pi 7" Touchscreen (with separate 5.25VDC 2.5A supply)
32GB Samsung Ultra microSD card
Dev system: Macbook Pro M3 OS:14.6.1
SD Card Formatter 5.0.3
Imager: Raspberry Pi 1.8.5
Settings changed before writing image: Host Name, User Name, Password, WiFi credentials
Peppy image: klee-official.7.0.img
I ran the suggested git commands for the Klee issues but nothing changed.
I'm stumped.
Hardware Pi3B+ with 5.25VDC 2.5A supply
Raspberry Pi 7" Touchscreen (with separate 5.25VDC 2.5A supply)
32GB Samsung Ultra microSD card
Dev system: Macbook Pro M3 OS:14.6.1
SD Card Formatter 5.0.3
Imager: Raspberry Pi 1.8.5
Settings changed before writing image: Host Name, User Name, Password, WiFi credentials
Peppy image: klee-official.7.0.img
Statistics: Posted by perge — Sat Apr 19, 2025 4:38 pm