No idea which driver you're using ('Lontium private driver') but the devicetree bindings for the upstream driver are in https://github.com/raspberrypi/linux/bl ... t9211.yaml
Recommendation: don't meass around with config.txt if you have no idea of what you're doing. Use a stock config, add your overlay at the bottom.
I would matter about GPIO usage - as you don't have a GPIO for RESET i.e. - as a false overlay will not be loaded!
Recommendation: don't meass around with config.txt if you have no idea of what you're doing. Use a stock config, add your overlay at the bottom.
I would matter about GPIO usage - as you don't have a GPIO for RESET i.e. - as a false overlay will not be loaded!
Statistics: Posted by aBUGSworstnightmare — Sun Feb 23, 2025 8:21 am