the parameters of the video mode are well documented in https://github.com/raspberrypi/linux/bl ... modedb.rst'video=HDMI-A-1:1920x1080M@60D' or 'video=HDMI-A-1:1920x1080M@60'Add below to the beginning of cmdline.txt, make sure all remains on a single line.screen needs to be connected to HDMI next to USB-C.Code:
video=HDMI-A-1:1920x1080M@60D
As said, make sure you've not added any useless stuff to config.txt.
btw, can i set @100D or @100?
You should be able to figure out the difference between @100D or @100 yourself.
Is your screen supporting 100Hz refresh rates?
Statistics: Posted by aBUGSworstnightmare — Thu Nov 07, 2024 6:26 am