Hi,
I am trying to boot Pi4 from a fresh Crucial MX500 ssd. But the Pi4 is refusing to boot.
Pi4 is booting fine from SD card, I have verified that EEPROM is updated to the latest version.
I am trying to boot raspberry pi os lite 64bit.
I am using official Pi power supply (27W).
I have following connected devices.
1x 7 inch HDMI screen with touch screen over a usb 2 port
1x Crusial MX500 250GB SSD over USB3.0 port, with a SATA to USB 3.0 adapter.
Screenshot taken during boot sequence:I have tried to flash the SSD using Raspberry Pi Imager as well as Balena etcher, both result is similar failure.
current cmdline.txt after the failed boot looks like the following:
I am trying to boot Pi4 from a fresh Crucial MX500 ssd. But the Pi4 is refusing to boot.
Pi4 is booting fine from SD card, I have verified that EEPROM is updated to the latest version.
I am trying to boot raspberry pi os lite 64bit.
I am using official Pi power supply (27W).
I have following connected devices.
1x 7 inch HDMI screen with touch screen over a usb 2 port
1x Crusial MX500 250GB SSD over USB3.0 port, with a SATA to USB 3.0 adapter.
Screenshot taken during boot sequence:
- Image may be NSFW.
Clik here to view.
- Image may be NSFW.
Clik here to view.
current cmdline.txt after the failed boot looks like the following:
Code:
console=serial0,115200 console=tty1 root=PARTUUID=68c27fb4-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=IN systemd.run=/boot/firmware/firstrun.sh systemd.run_success_action=reboot systemd.unit=kernel-command-line.targetStatistics: Posted by harshitgoel96 — Mon Jul 22, 2024 4:21 pm
